Autosport Labs

thats not a problem Brent as the engine should fire from the fuel in the flaot on the webers - hence us wanting it to use the crank pick up to trigger the fuel pump relay - is that possible?

Will also search other threads as suggested.

Thanks

Cool, but is there anything need to program the MJLJ unit to do to action the output??

Anyone??

Brent??

I am in the final stages of installing MJLJ to a mk1 escort running a 1600 zetec se on twin webers. I want to use MJ to activate the fuel pump relay, for example when the engine speed hits 500 rpm it activates the relay to the pump. I will be using one of the 4 user outputs on the molex so can anyon...

Hi All, Just after some clarfication on how this would work. I want to have the fuel pump on my Mk1 Escort to be "turned on" by MJ when it senses the engine is turning over, rather than just having it running on an ignition live. The reason for this being - I don't want the pump running af...

I know how to wire it up as I have installed it on my mini - and i have limp home via EDIS and the proper set up when MJ is connected. edit: the penny has just dropped as the edis works on the earth side and not the live - schoolboy error!! in regard to the wiring diagram - i would just suggest an a...

So how would the limp home mode of the EDIS work - or in this case can I not have both?

I will need to re-wire it seems then as I have wired the live in from EDIS.

Thanks Brent - but could i ask you to update the wiring pages of the site as it wasn't clear.

So basically the coil has a 12v feed from the EDIS and MY "COIL OUTPUT".

Would it be safe to splice these feeds together before they pass through the bulkhead of the car - therefore only one wire on the engine side?

Cheers again.

Hi all, I have wired up a standard MAP MJLJ unit in my mini and it runs spot on, now I have been asked to do the wiring loom and wiring on a mk1 escort running a 1600 zetec se setup. This Mj has a hard rev limiter built in and I am really struggling to work out how i wire up the coil 12v feed. On th...