I have wired up a standard MAP MJLJ unit in my mini and it runs spot on, now I have been asked to do the wiring loom and wiring on a mk1 escort running a 1600 zetec se setup.
This Mj has a hard rev limiter built in and I am really struggling to work out how i wire up the coil 12v feed.
On the mini it was the live from the EDIS supplying the coil, so that it works in "limp home" via the EDIS or MJ.
With the hard rev limiter there is another live out from MJ to the Coil.
My question is this:
Do I need the live from MJ to the Coil, from EDIS to the coil or both?? I have looked around the site and can't find any useful info.
Please help me.....
