Autosport Labs

I'v modified the pulley to take the
timingwheel from a ford.

I think the name of the guy was Bill Shurvington
or somethink like that.
I did found him in my contacts in outlook.

Ivan

I bought my MJLJ in the UK and I can't seem to find
the UK based vendors anymore on your site, is this
because there aren't any more?

Ivan

I see that this could become a problem as from now on I had to rebuild the timingwheel becous it whent flying off at more than 7000 rpm and destoyed th vr sensor and oilfilter on its way out! In the mean time i've installed new camshaft pulleys to adjust the cam timing. I'm driving more and more tow...

I just read it again and plaese confirm it for me I'm still runnin 3.0.0 version (need to update ) The MJLJ retards the advance to 0° 100 revs befor the set limit acting as soft limiter befor the output get activated. I'snt this enough not to risk damages? Doe's one really need the hard rev limiter?...

I just read about the rev limiter that megajolt itself doesn't do anything , it only commands the output. I forgot there was an output in the first place and thought the ingnition was retarded when the limit reached. Could you point me in the right direction in the manual or explain some more? Ivan ...

MjLj installed onboard in a old car stereo amplifier housing
with special racing connectors.

Some pictures

It seems its up to me to develop a new map for the 20xe engine.
Once I'm sure of the knock detecting issue I'll do some testing
with the maps.

Ivan

I'would also be interrested in installing knock sensing.
Whit this it's mutch safer to find the limit not?

Ivan

Hello I'm running for 3 years on the megajolt without any probs at all !!!! Now I'm running the basic map and would like to find a more competitive map that some one has tested on his engine with good results. I don't want to go to extreme risk on the engine but I know there is more than the basic 2...

Mine is the original opel tach with 3 connections
1 = the +12V
2 = the ground
3 = signal from coil

So you used only the 2 diodes and nothing else ?
I'll try it in the morning

Ofcourse they have a polarity, diodes are a one way street and the zener is a limiter,
but what I don't know is are there also zeners for higer capacities?

Maybe some part numbers that work