Autosport Labs

Hi, let's try eliminating the lua script as a variable. Erase the lua script you have, and then write it back to the config. Then try logging directly using the action button on the unit. What activity do you see? Do you see the logging LED flash, or the red error LED light up? Also, you can try di...

I am trying to get my sd logging working again. Sometime in the last 6 months i have lost the capability. I have a MK2 on my daily driver/track car. I have logging set to come on when gps speed > 5. I am on 2.12.0 firmware. I have formatted my sd card. My script looks like this: function onTick() if...

I think a G force meter would be a good option in the dashboard gauge menu. I usually analyze the data after a race event but using my in vehicle tablet I find myself glancing to much at the accel X/Y graph while driving. I really would like a peak and hold option for the gauge. It could work as fol...

I have been having an identical problem and I discovered that the sd card is no longer properly seated in the card holder. I had to open up the MK2 case to discover this issue. It appears that the card is not being held to the contacts and therefore not getting data from the MK2 processor. There isn...

I'm running out of things to try regarding pulling CAN data from my 2016 MK7 VW. I'm wondering if anyone else has had any success with the current MY VW lineup of cars? Brent has suggested that the VW CAN may require some type of wake up trigger but I have found nothing on the internet to try. VCDS ...

When will the new functionality shown in this video > https://www.youtube.com/watch?v=zc1Bi__0IDk
be released to the mobile version of RCP?

I'm really interested to try out the mapping functionality using the GUI.

Thanks,
Dan

Update ** I have plenty of OBDII data so that is good. I ran the CAN logging script and at 500K with OBDII logging OFF, I get the following data when polling enabled: [lua] Starting Lua Task [lua] Loading script. Length: 429 Initializing CAN0 with baud rate 500000 CAN init success! [lua] Successfull...

I have been trying to collect CAN data on my MK2 for several months trying various techniques and hoping that each firmware update will yield new results but I keep striking out. I feel that I may be missing something fundamental since this doesn't appear to be a topic that others are addressing ver...

I have a plx wideband 02 and vac/boost sensor connected to a plx multi gauge mounted in a vent pod on my Golf R. I also have a 0-5vdc output wired from both sensor modules into inputs on my mk2 racecapture da unit. I created two additional channels (boost, afr) that are mapped to the appropriated an...

I used a micro sd extender which you might also try. They are cheap and available on Amazon. You can mount the sd micro slot in a more convenient location Like I did.

Hello, First time post on this forum. I just purchased a RCP with CAN and I have a question and concern about the GPS antenna. First, can anyone tell me what the signal gain is for the antenna used on the 50hz units that are shipping? Also, I am going to mount the antenna on the roof in the center o...

Does anyone have experience using the Brightwater TPMS system with RaceCapture hardware? There was a mention of the Brightwater TPMS and CAN on the Autosport web site which started a deeper investigation on my part. However, I have not been able to find a supplier for either the sensors or receiver....