Autosport Labs

You might have worked it out already but posting in case someone else asks.

From what I can work out the RCT logs it’s telemetry data to the connected device when you’re in the dashboard and not the the RCT.

Doesn’t seem to keep a local copy of the data in the RCT.

OK solved it. Sort of. Read a note on the legacy OBD adaptor that if it detects a CAN signal it will use that for OBD data and not the K-Line. As the Elise has a custom CAN config with only some data available it looks like once it detects data on the CAN +/- then it will ignore data on the K-Line. ...

Brent, been doing some more diag today. The info log is showing a [CAN device] timeout rx CAN msg Timeout sending PID request 12 I tried other default PID's and get the same error. I've also tried another OBD adapter with my phone (KIWI 3) and that receives the basic data (RPM, Engine temps etc) fin...

Hi Brent. I'm back from hols and had a quick play with the device this morning. Can't seem to get it to pickup any of the OBD data this morning. I know it used to work before I started messing with it. Is there any way to do a factory reset ? or is there a default config I can load from somewhere so...

Started by pulling OBD data. Can get some although I think I’ve messed up the RPM mapping trying to get things working. I did see that post so was going to use that to try and get the CAN info mapped as well. I’m away at the moment so don’t have access to the car. I’ll have another go when I get bac...

It’s a 2006 Elise 111r. So the Toyota engine version. I think I’ve fixed the interference with the instrument cluster. It was the CAN bus speed. I found a post on a lotus forum that said it was 1k baud not the 500k default. So changed it to that and it seems fine now. Just need to work out how to se...

I think I saw another post on this in the RCP forum but I'm getting the same issue with RCT. All starts up OK but as soon as I add an OBD channel to monitor the dials on the Elise crap out. e.g. the Elise rev counter will go to 0 and kind of tick up and down a little. I've tried enabling and disabli...

OK fixed it. After reading a few other posts I managed to load the latest firmware. However. I couldn't do it through the current windows app (1.13.1) as I couldn't find a firmware update option. I had to uninstall, then install and older version (1.3.13 I think) then I could see the firmware option...

I was doing a firmware update on my RaceCapture track through the latest windows client and it hung at about 20% and threw an error 3 and the windows app completely hung. I restarted the windows app but it now won't connect to the RC . There's a green flashing light on the RC and when i connect it t...