Autosport Labs

Cheers, i may just wrap that section in some shielding or re route it slightly.

Hi all, just a quicky, is it ok to run the car's main 12v battery feed next to the edis unit? Ta

In case anyone searches pins 1 and 2 are ignition triggers pin 3 is 12v supply, 4 is not needed. On the Ford coilpacks does coil A correspond to 1&4 and b 2&3?

It's the same coilpack as found on the mpi mini's, according to the wiring diagram 2 of the pins go to the ecu and one goes to earth, the other pin is not used, does this help at all?

Ah, i've worked out one pin is for an earth and the other a 12v feed, on the mpi mini's the earth is used but there is no 12v feed so i'me guessign this isn't needed?

Hi, just wondering if anyone has a wiring diagram for the sagem/vauxhall type coilpacks which use a 4 pin plug as apposed to the 3 pin type found on Fords? Thanks

Thanks

Sorry posted in the wrong section. Yes with and without the leads would be great thanks. Also do you know if the plug is the same on the earlier and later coil packs?

Hello, just wodnering if someone can measure the height of the later ford coil pack, the one that doesnt use the ht leads will the clips.

Ah, i've been on turbominis since day one pretty much, the map is based on a standard dizzy i believe.

Hi, I recently read that you should under no circumstances run more than 20 degrees static at idle, now the base map i have (standard metro turbo) starts at 27 degrees, is this ok? Is this due to the map compensating for having no vac advance?

Ah i was expecting to see clusters of 4 led's like in the kit

Cheers, where did you get the little covers to make them look like one light?

I meant Ken but thanks for the reply

Bump