My computer won't open a s19 file
Moderators: JeffC, rdoherty, stieg, brentp
My computer won't open a s19 file
What program is needed to run the firmware V4.0.2? I have downloaded it and it tells me that it needs to go on the internet to find out what program created it. Can you please let me know so I can sort my computer out. I am running vista which always seems to give me hell. Do I need windows office aswell?
Hello,
The .s19 file you are referring to is the firmware image residing on the MJLJ processor, which comes pre-programmed. If you already have a MJLJ V4 then you likely have the 4.0.2 firmware installed. To verify, connect the configuration software to the controller and click "help/about"- this will tell you the current firmware image.
The .s19 file you are referring to is the firmware image residing on the MJLJ processor, which comes pre-programmed. If you already have a MJLJ V4 then you likely have the 4.0.2 firmware installed. To verify, connect the configuration software to the controller and click "help/about"- this will tell you the current firmware image.