Am i right in taking, with the edis/coilpack/vrsensor i can get my engine running on 10deg fixed advance 'limp home mode' before adding the Megajolt and messing about with ignition maps and the throtal possition sensor?
Just seems a good half way point to test the loom/edis/coil setup.
Dainel
Limp Home Mode (fixed advance, with megajolt disconnected)
Moderators: JeffC, rdoherty, stieg, brentp
-
NITROPIXIE
- Posts: 704
- Joined: Sun Sep 07, 2008 1:54 pm
- Location: Fareham, GB
Absolutely you can. Its a good way of getting your trigger wheel set up correctly so its at 10 deg advance without megajolt changing the advance.
1310 A-series Mini, lightened and built myself. V4 board and loving it
Rasputin22 - The Mini Forum
Rasputin22 - MK1 Golf Forum
Megajolt repair for the UK available
Rasputin22 - The Mini Forum
Rasputin22 - MK1 Golf Forum
Megajolt repair for the UK available