Run Time data analysis

[snapperpaul]

I can see the ignition anvance and Kpa load with revs but don't understand what i am looking at/for with the RPM and Load acceleration.
Here is a section just as the car backfired.
Any thoughts?

55:04.5 3355 99 27 833 0 0
55:04.8 3530 99 28 741 -32 0
55:05.3 3723 101 29 1666 0 0
55:05.3 3972 98 30 1233 33 0
55:05.5 4231 99 31 1566 0 0
55:05.8 4443 96 33 1466 0 0
55:06.6 4691 98 33 -933 -66 0
55:06.3 4954 101 34 -566 -100 0
55:06.5 5181 102 34 -400 33 0
55:06.8 5425 98 35 700 0 0
55:07.3 5360 101 35 -4188133 66 0
55:07.3 4081 102 30 -25233 166 0
55:07.5 5271 30 37 -1000 33 0
55:07.8 4633 27 37 -1966 -33 0
55:08.5 3941 25 36 -2500 0 0
55:08.3 3485 41 38 -193 193 0
55:08.6 3760 98 29 0 0 0
55:08.8 3852 98 29 -200 0 0
55:09.6 3906 97 29 300 0 1
55:09.3 3932 95 30 166 0 0

I get the feeling from this data that the jolt and the EDIS is getting signals from the VR so the problem could be fuel.
any guidance please.

[Patriq]

I can see the ignition anvance and Kpa load with revs but don't understand what i am looking at/for with the RPM and Load acceleration.
Here is a section just as the car backfired.
Any thoughts?

Can you be a bit more clear ? Do you mean - what should I be looking for. Or do you mean, what does all this data represent ?

[snapperpaul]

When it comes to Rev accel and Load accel what am i looking for?

and

Does this data show any bad / wrong things?

The cut and paste has pushed the data together a bit but its
Time, Revs, Kpa, Advance, Rev Accel , Load Accel and event log.

You can see that i hit the space bar after the backfire event which i am assuming is why the Rev Acceleration is minus 4 million @ 55.07.3