1380 mini

rich_2137 · Post by **rich_2137** » Wed Apr 14, 2010 3:44 pm

Hi

Im Richard and iv just built myself a 1380 spec below

•Twin HS4's
•Slark SF4 cylinder head
•1380 block with centre main strap
•Billet 286 kent cam and followers
•lightened steel flywheel and back plate
•orange clutch with upgraded friction plate
•1.5 high lift roller rockers
•swiftune Alloy Duplex vernier timing gear set
•swiftune double valve springs
•1300 GT con rods (balanced)
•wedged and balanced crankshaft
•straight cut 1:1 drop gears

is there a map out there that will give me a good starting point?

rich_2137 · Post by **rich_2137** » Mon Jun 28, 2010 10:53 am

Need map for this engine asap please if anyone can help?

NITROPIXIE · Post by **NITROPIXIE** » Mon Jun 28, 2010 9:58 pm

Sorry i dont have a map specifically for your engine. There is one for called spi2 (i think) which i always use as a good starting point so long as you don't have really high compression. If you can't find it then send me an email and i shall send you a copy of it.

We would like some piccies on here if there are any available as it sounds quite a sweet ride with lots of effort been spent.

Ryan

rich_2137 · Post by **rich_2137** » Tue Jun 29, 2010 11:26 am

Hi Ryan

Thanks for looking for me il try the spi2 map to see if that will work for me, at the mo im running the aldon yellow map but not sure if its doing it any good as im running my engine in still.
Yeah il post some pics, iv posted a few on the minifinity website i reconise your name from there lol but il put some on here too

Thanks
Rich