I just got my setup running on my Chevy small block powered '84 s10 blazer.
The MAP sensor is hooked up but doesn't give a read out.
Its working like a mechanical advance dizzy at the moment.
I can't find any other MAP settings besides the one option in the configurator Options.
My vacuum seems abundant, there is plenty of hissing/whistling when I remove the hose.
Any suggestions????
MAP sensor doesn't work... What am I missing.
Moderators: JeffC, rdoherty, stieg, brentp
-
- Posts: 5
- Joined: Thu Sep 30, 2010 5:03 am
-
- Posts: 704
- Joined: Sun Sep 07, 2008 1:54 pm
- Location: Fareham, GB
-
- Posts: 5
- Joined: Thu Sep 30, 2010 5:03 am
-
- Posts: 5
- Joined: Thu Sep 30, 2010 5:03 am