Hey guys.
Long time since iv been on here, got my set up working on my Mini probably around 2 years ago and been running fine since. Im now having the engine rebuilt and making a couple of changes.
I want to change the crank sensor, at the mo iv been running i think a standard ford one, quite long with just one bolt, and to me, it doesn't seem right. It flexes quite a bit in its mounting so i cant help think thats going to affect what its doing.
So i want to change it to one of the short ones with 2 mounting holes... any idea what one it is i need to get?
cheers
What sensor?
Moderators: JeffC, rdoherty, stieg, brentp
Have you got a picture of your mounting? Our experience is that as long as the bracket is robust enough for its size/shape there is no issue at all.
Our A-series package uses 3mm thick steel and can use the same sensor as yours, you can see pictures of it here: http://trigger-wheels.com/store/contents/en-uk/d37.html One of our early prototypes was made from 3mm alumiunium for ease and as you would expect that could flex/vibrate a bit but not enough to cause any problems.
Our A-series package uses 3mm thick steel and can use the same sensor as yours, you can see pictures of it here: http://trigger-wheels.com/store/contents/en-uk/d37.html One of our early prototypes was made from 3mm alumiunium for ease and as you would expect that could flex/vibrate a bit but not enough to cause any problems.
Official Megajolt distributor for UK and Europe.
Complete Megajolt packages, EDIS kits, Trigger wheels and everything else you need for your megajolt install
www.trigger-wheels.com
Complete Megajolt packages, EDIS kits, Trigger wheels and everything else you need for your megajolt install
www.trigger-wheels.com