1900cc honda motor...SOHC

hondalude86 · Post by **hondalude86** » Sat Jul 30, 2011 3:45 am

Engine Mfg: Honda
Engine Code: ET2
Cylinders: 4
Displacement (cc): 1900cc
Rev Limit: 7.5k
TPS or MAP: MAP
Boosted or Normally Aspirated: NA
If Boosted- max Pressure (KPa): (at high altitude, highest KPa reads at 86kpa when the car is off
Modifications: Dual Weber 45DCOE, 285i/e w/12mm lift, 11.5:1 compression 4-1 Header with 2.25 collector. No Head mods
Chassis: AB1 (1986 Honda Prelude)
Notes: At high altitude (5300ft-10000ft above sea level)

hondalude86 · Post by **hondalude86** » Tue Aug 02, 2011 3:26 am

well, here is the map i'm running right now, and its kicking ass, probably could use more advance up top, but here it is anyway!

808asianeering · Post by **808asianeering** » Thu Nov 12, 2015 10:05 am

hondalude86 do you have a diagram on how you wired the mj into the oem honda wiring?

i am doing an f23a sohc project and was wondering if you could help me with the setup...

thanks in advance