MJL - wiring of plug.

Spitty · Post by **Spitty** » Wed May 30, 2012 2:30 pm

Hi, i have the MJL c/w Internal MAP and just need to know which way round the wiring is shown for the unit in the installation guides; is the picture shown looking into the plug from the MJL side or, is it looking into the plug from the wiring side?
Also, what size is the spigot for the vac connection please?

Cheers,

Post by **brentp** » Wed May 30, 2012 3:01 pm

Hello Spitty,

In the installation guide the molex plug orientation is looking into the Megajolt unit. It should be depicted in the diagram as well.

For the vacuum line you want the smallest thin-walled tube you can find - 0.125 " inside diameter.

Spitty · Post by **Spitty** » Wed May 30, 2012 3:15 pm

Many thanks for the quick reply.
So if i'm right that means, power (+ve) goes to the bottom right and (-ve) goes to the top right as i look at the unit.
Which also means that positive and negative are bottom right and top right respectfully looking into the backside of the plug.

Thanks again.

Post by **brentp** » Wed May 30, 2012 9:42 pm

That's correct sir!

Spitty · Post by **Spitty** » Thu May 31, 2012 7:30 am

Many thanks Brent, is much appreciated.