TPS Backwards

locost27 · Post by **locost27** » Wed Oct 10, 2012 10:08 pm

Hi,

Wiring in the tps. I can get power etc to it and the config reads it fine.

However when calibrating the on the lap top it says it is wired backwards. I have tried several ways and it makes no difference.

Where am I going wrong?

thanks

cng1 · Post by **cng1** » Wed Oct 10, 2012 10:32 pm

Either you have got your TPS mounted back to front (and hence is being driven the wrong way) or you've got your wiring wrong.

DannyP · Post by **DannyP** » Fri Oct 12, 2012 3:31 am

Switch the power and ground wires to the TPS. It will now read the correct way. Simple.