EDIS 6 on an 4 cilinder?
Moderators: JeffC, rdoherty, stieg, brentp
-
- Posts: 10
- Joined: Tue Oct 16, 2012 10:54 am
EDIS 6 on an 4 cilinder?
Hi there Ive bought an strange type of megajolt, i think its an v3 but they changed it.
They built the edis (6) unit into the board and there is also built in an hard ref limmiter.
I found some info about it i think it is from morspeed
The previous owner used it on an 6 cilinder jaguar i beleave, but now im using it on an vw 16v with R1 carbs.
The problem is if i rev up the engine then i get a lot of misfires while revving.
I dont know what the problem is Ive checked al the eartings and directly made directly positive connections
thanks,
They built the edis (6) unit into the board and there is also built in an hard ref limmiter.
I found some info about it i think it is from morspeed
The previous owner used it on an 6 cilinder jaguar i beleave, but now im using it on an vw 16v with R1 carbs.
The problem is if i rev up the engine then i get a lot of misfires while revving.
I dont know what the problem is Ive checked al the eartings and directly made directly positive connections
thanks,
-
- Posts: 10
- Joined: Tue Oct 16, 2012 10:54 am
-
- Posts: 10
- Joined: Tue Oct 16, 2012 10:54 am
I don't have any pictures ik could make some if you like, and how do i put them here?
i found one picture on the web...
But i found out that there is a hard rev limmiter build into, and thats correct because of the backfire when it's in the limmiter ( just loud explosions and flames up to 50 cm)
The motocraft edis 6 is build into the main board , it looks really clean.
thanks,
i made some pictures can't upload them it gives an error tried uploading empty file
i found one picture on the web...
But i found out that there is a hard rev limmiter build into, and thats correct because of the backfire when it's in the limmiter ( just loud explosions and flames up to 50 cm)
The motocraft edis 6 is build into the main board , it looks really clean.
thanks,
i made some pictures can't upload them it gives an error tried uploading empty file
- Attachments
-
- imagesCA8M3969.jpg (7.92 KiB) Viewed 14336 times
-
- Posts: 10
- Joined: Tue Oct 16, 2012 10:54 am
Some pictures of what is inside the box would be very helpful if you can make them available.
Official Megajolt distributor for UK and Europe.
Complete Megajolt packages, EDIS kits, Trigger wheels and everything else you need for your megajolt install
www.trigger-wheels.com
Complete Megajolt packages, EDIS kits, Trigger wheels and everything else you need for your megajolt install
www.trigger-wheels.com
-
- Posts: 10
- Joined: Tue Oct 16, 2012 10:54 am
That is very interesting. That isn't any version of the Megajolt that I recognise. It is possible that someone has designed their own board using some of the same chips as the Megajolt so that they can use the same firmware/software. Brent will know for certain but I don't recall anyone having an arrangement to do that.
When you bought the system were you given a disk with the software for it on there - if so is it definitely the Megajolt configurator that is on there? Given that it isn't a standard ECU it may not work with the normal software so getting to the bottom of what software it expects is the next step.
When you bought the system were you given a disk with the software for it on there - if so is it definitely the Megajolt configurator that is on there? Given that it isn't a standard ECU it may not work with the normal software so getting to the bottom of what software it expects is the next step.
Official Megajolt distributor for UK and Europe.
Complete Megajolt packages, EDIS kits, Trigger wheels and everything else you need for your megajolt install
www.trigger-wheels.com
Complete Megajolt packages, EDIS kits, Trigger wheels and everything else you need for your megajolt install
www.trigger-wheels.com
-
- Posts: 10
- Joined: Tue Oct 16, 2012 10:54 am
ive bought it arround a year ago and the previous owner had it laying around for a couple of years so i think it around 3 to 4 years old
it was running on v2 software i've upgrated it to 3.2.1 software with 2.8 ? firmware or something...
I did it the same way as was discriped on the autosportlabs site...
i found out that morspeed is an tuner for mini rover and jaguar they sold them for arround 150+ pounds
By the way i live in the nederlands i've bought it over here from somebody.
I found out last week when i was searching for the model it was'nt V1 V2 v3 or v4
so then is was looking for megaspark it wasn't that eighter... so with al little search i found an picture alike that was from morespeed, but if it runs im happy
greets
it was running on v2 software i've upgrated it to 3.2.1 software with 2.8 ? firmware or something...
I did it the same way as was discriped on the autosportlabs site...
i found out that morspeed is an tuner for mini rover and jaguar they sold them for arround 150+ pounds
By the way i live in the nederlands i've bought it over here from somebody.
I found out last week when i was searching for the model it was'nt V1 V2 v3 or v4
so then is was looking for megaspark it wasn't that eighter... so with al little search i found an picture alike that was from morespeed, but if it runs im happy
greets
-
- Posts: 10
- Joined: Tue Oct 16, 2012 10:54 am
i can't read the text on the chip it's really small and black on black
but it runs on the v3 software but im keep getting backfires but i think thats because of the edis 6 on an 4 cilinder
the only thing is that edis modules are really hard to get here in the netherlands
next monday i hear from someone who has an edis but doesn't know wich one... i hope it's an edis 4
if you guy's want some more info about the chips or something just ask...
cheers,
but it runs on the v3 software but im keep getting backfires but i think thats because of the edis 6 on an 4 cilinder
the only thing is that edis modules are really hard to get here in the netherlands
next monday i hear from someone who has an edis but doesn't know wich one... i hope it's an edis 4
if you guy's want some more info about the chips or something just ask...
cheers,
If you're stuck for an EDIS-4 give us a shout, we have plenty here.
Official Megajolt distributor for UK and Europe.
Complete Megajolt packages, EDIS kits, Trigger wheels and everything else you need for your megajolt install
www.trigger-wheels.com
Complete Megajolt packages, EDIS kits, Trigger wheels and everything else you need for your megajolt install
www.trigger-wheels.com
-
- Posts: 10
- Joined: Tue Oct 16, 2012 10:54 am