Graphic programming of advance curves

[Alex B]

In addition to the 10x10 grid a graphic way to put in the advance curves might be handy. At 0.47 of the film does it start. Both centrifugal and vacuum advance can be changed that way.

http://www.youtube.com/watch?v=0QeaNSlc1N8

Alex

[brentp]

Hi Alex,

We have this in the software - in our case, we expressed it as a 3D view for both load and RPM:
http://www.autosportlabs.net/MJLJ_V4_Op ... erspective