Hi,
I have a MegaJolt V3 and I'm about to put it in my car.
EDIS is running already in Limp Home mode.
I have some questions about flashing.
I have found this and I quote from the Operation guide:
"Persisting the data to flash requires a significant amount of time"
1. Is there a message when it is flashing ?
2. Is there a message when flashing is finished ?
3. How many minutes does the flashing needs ?
I have read all 13 pages on this forum, but didn't find anything.
Thanks for your help.
Cornelius
Question about Flash
Moderators: JeffC, rdoherty, stieg, brentp
If you're referring to this section:
http://www.autosportlabs.net/MJLJ_V4_Op ... figuration
We didn't mean it would take minutes; it actually takes less than a second to commit the data to flash. It needs to be done as a separate process as a matter of practicality with how the firmware is designed and the requirements of the Megajolt processor.
Hope that helps!
http://www.autosportlabs.net/MJLJ_V4_Op ... figuration
We didn't mean it would take minutes; it actually takes less than a second to commit the data to flash. It needs to be done as a separate process as a matter of practicality with how the firmware is designed and the requirements of the Megajolt processor.
Hope that helps!