RaceCapture does not turn on

Race Capture Pro hardware installation- power, wiring, physical installation, etc. See the dedicated forum for Sensor related topics

Moderators: JeffC, rdoherty, stieg, brentp

Post Reply
decathect
Posts: 13
Joined: Fri May 10, 2013 2:58 pm

RaceCapture does not turn on

Post by decathect »

Hey all,

I recently pulled out my RCP after sitting for about 8 months (race car broke, got chopped up and scrapped it) and I can't even get it to power on now.

I provide 12V power to the proper pins, and I get nothing. No lights or anything. I measure the voltage across the power terminals and I get 3V. With the power wires disconnected from the RCP, I get 12V. Seems like something failed (short).

What could be going on here? For all I know it quit working before the end of our last race, I never tried it after that.

Can I send this in for diagnosis and repair?

brentp
Site Admin
Posts: 6282
Joined: Wed Jan 24, 2007 6:36 am

Post by brentp »

Does it power up over USB?

If not, you are welcome to have us look at it. email us at sales@autosportlabs.com and we will help out.
Brent Picasso
CEO and Founder, Autosport Labs
Facebook | Twitter

Post Reply