Sierra 1.8 CVH front pulley

capri_turbo · Post by **capri_turbo** » Mon Apr 10, 2006 3:14 pm

As title. I have the bottom pulley off said vehicle with 36 -1 trigger wheel attached... I need to get the trigger wheel removed from the pulley so I can attach it to my front pulley... any ideas as to how to get it off? tried a puller, but it won't fit. My next idea was to take it to a machine shop and have the middle turned out of the pulley, but I'm looking for a cheap otion...

Cheers

Josh_b · Post by **Josh_b** » Mon Apr 10, 2006 7:07 pm

i use a couple of spanners, the open ended type and work round the wheel, its quite easy try a few spanner sizes etc

michael · Post by **michael** » Tue Apr 11, 2006 7:13 am

I managed it with a bit of heat not too much from a plumbers blow torch and a couple of large flat headed screwdrivers.

hope this helps
michael

capri_turbo · Post by **capri_turbo** » Tue Apr 11, 2006 12:26 pm

the spanner method is most efficient.

Autosport Labs

Sierra 1.8 CVH front pulley

Sierra 1.8 CVH front pulley

i use a couple of spanners,

front pulley

Thanks guys... it's off