CAN Termination

smallspeed · Post by **smallspeed** » Sat Feb 20, 2016 9:44 am

Does anyone know if there's CAN termination built into the race capture unit? I have only one item on my CAN bus (abs pump) and it does have a termination resistor, but not sure whether I need to add one to my wiring or if there is termination built into the race capture box...

Post by **brentp** » Sun Feb 21, 2016 8:46 pm

Hi -

Yes - both CAN channels are terminated inside the unit.

smallspeed · Post by **smallspeed** » Wed Feb 24, 2016 8:20 am

Fantastic, thanks Brent.. I will leave the RCP MK2 in place all the time and wired in, that way I can just use it as the termination one end and the ABS pump as the other