RaceCapture and aftermarket wideband O2 sensors

bdon22 · Post by **bdon22** » Mon Mar 21, 2016 4:25 am

Does the new RaceCapture support aftermarket wideband O2 sensors? Eg. Innovate LC-1, AEM UEGO, PLX, etc. ?

gizmodo · Post by **gizmodo** » Mon Mar 21, 2016 4:13 pm

The sensor is typically a Bosch or NTK sensor. What you are mentioning is the controller for the sensor. If you're asking if the RaceCapture supports them, as long as they have an analog output, which most of them do then yes, it is supported. You would hook up the analog output of the wideband controller to one of the analog input of the RCP and then configure the analog input using the application.

bdon22 · Post by **bdon22** » Mon Mar 21, 2016 6:45 pm

gizmodo wrote:The sensor is typically a Bosch or NTK sensor. What you are mentioning is the controller for the sensor. If you're asking if the RaceCapture supports them, as long as they have an analog output, which most of them do then yes, it is supported. You would hook up the analog output of the wideband controller to one of the analog input of the RCP and then configure the analog input using the application.

I'm referring to the new kickstarter RaceCapture since I didn't see any ports for it.

gizmodo · Post by **gizmodo** » Tue Mar 22, 2016 2:49 pm

You would need the RaceCapture Pro for that.

bdon22 · Post by **bdon22** » Tue Mar 22, 2016 5:35 pm

Thanks for the reply.