Hi I'm Dave from the UK, I race Autograss with a fully space framed fiat, running a 1420cc vauxhall 8v on omex and down draughted jenvey throttle bodies.
Im looking at getting most of my gauge data straight from the omex 600 is there an easy way to do this, the scripting is a little baffling at the moment .
Thank you in advance.
National Autograss Racer from the Uk
Moderators: JeffC, rdoherty, stieg
National Autograss Racer from the Uk
- Attachments
-
- E0506 A0627.jpg (47.68 KiB) Viewed 7108 times
Hi Dave, welcome!
If your Omex 600 outputs data via CANbus or sensor values via 0-5v ranges RCP can read the information. You will have to do some research to figure this out. Once you do we have information on how to decode CANbus data and/or hook up direct sensors on our wiki: https://www.autosportlabs.net/RaceCapturePro
If your Omex 600 outputs data via CANbus or sensor values via 0-5v ranges RCP can read the information. You will have to do some research to figure this out. Once you do we have information on how to decode CANbus data and/or hook up direct sensors on our wiki: https://www.autosportlabs.net/RaceCapturePro
Ryan Doherty
Autosports Labs
Autosports Labs