Are there any undocumented API commands? V4.

parky1972 · Post by **parky1972** » Sat Jun 11, 2016 1:34 pm

Are there any undocumented API commands, or other commands?
I ask as I am looking at building a project for my car that will use a basic serial bus.
Commands sent between the megajolt a display and a secondary processor.
Some commands ment for the display or processor would be sent to the megajolt too.

I just want to make sure that megajolt will simply ignore them and that there are no additional commands that I could send in error that might shut down or change the firmware of the megajolt.

Thanks.

Jason.

parky1972 · Post by **parky1972** » Fri Jun 17, 2016 4:19 pm

Brent?

I'd like to move forward with this project. But don't want to risk erasing my test Megajolt unit.
However, I don't want to add unnecessary hardware if it's not needed.

Jason.

Post by **brentp** » Thu Jul 07, 2016 10:52 pm

Hi Jason,

There are no undocumented API commands. You can see the current firmware in the downloads section if you'd like to dig into that.

Sorry for missing this! Any business related inquiries you're welcome to reach us at sales@autosportlabs.com.

Thanks,