Podium Live Brake Switch Input

anastos · Post by **anastos** » Tue Apr 25, 2017 2:29 pm

Hi All,
Running RCP Mk3 with basic On/Off brake switch input on GPIO 1.
The data on the dashboard in Race Capture is working fine - reports "1" when brake applied "0" when not.
When I view the brake input on Podium Live it is represented as brake pressure 0 - 2000 and the reading does not change when brake applied. How can I get this corrected?

Thanks,
Dave

Post by **brentp** » Thu Apr 27, 2017 5:05 pm

Hi Dave,

When the channel is called 'Brake' it's expecting a linear brake pressure sensor. Try changing the channel name to BrakeSW and see if that turns it into a digital gauge instead where you can see the 0/1.

Thanks,

anastos · Post by **anastos** » Mon May 01, 2017 7:25 pm

That worked

Thank You

Dave W.