Trasmit RCP3 GPS data over CAN BUS

anastos · Post by **anastos** » Tue Sep 12, 2017 9:11 pm

I would like to share the GPS speed data from RCP3 with Megasquirt 3 via CAN.
How can I go about doing this? I have MS3 setup to broadcast data to RCP and it is working fine, I need to know how to identify the data of interest, and how to get RCP3 to transmit data to CAN BUS.

Post by **brentp** » Sun Sep 17, 2017 5:50 pm

Hi, we have some good examples here for sending CAN messages: https://wiki.autosportlabs.com/RaceCapt ... us_scripts

Hope this helps.

anastos · Post by **anastos** » Mon Sep 18, 2017 2:54 pm

Thanks I'll try that. Somehow I missed that info in the wiki.