ShiftX with /Track

EcotecMiata · Post by **EcotecMiata** » Sat Feb 10, 2018 1:59 pm

I'm assuming this won't work with race capture/track due to lack of LUA?

Paul

EcotecMiata · Post by **EcotecMiata** » Tue Feb 13, 2018 11:29 am

Anyone?

Post by **brentp** » Thu Feb 15, 2018 5:00 pm

Hi,

Sorry, it will not work with RaceCapture/Track.

turbogrill · Post by **turbogrill** » Fri Jul 06, 2018 2:33 pm

brentp wrote:Hi,

Sorry, it will not work with RaceCapture/Track.

Why wouldn't it work?

Post by **brentp** » Fri Jul 06, 2018 2:52 pm

RaceCapture/Track MK1 does not support Lua scripting, which is currently needed to control ShiftX2. The new RaceCapture/Track MK2 currently on pre-order does support Lua scripting, and can work with ShiftX2.

Thanks - Hope that clarifies things!

petik · Post by **petik** » Fri Jul 06, 2018 2:55 pm

brentp wrote:RaceCapture/Track MK1 does not support Lua scripting, which is currently needed to control ShiftX2. The new RaceCapture/Track MK2 currently on pre-order does support Lua scripting, and can work with ShiftX2.

Thanks - Hope that clarifies things!

Brent, will it also work when using the Legacy adapter on one of the buses? Not sure how the mk2 connection ports are setup.

Post by **brentp** » Fri Jul 06, 2018 3:03 pm

RaceCapture/Track MK2 with it's dual CAN bus can work with ShiftX2 using an RJ45 splitter; that way OBDII data can be accessed on CAN bus 1, and ShiftX2 can be controlled on CAN bus 2.

A splitter like this would do the job. The OBDII cable would plug into one of the ports, ShiftX2 in the other port, and the splitter's end would plug into RaceCapture/Track MK2.
https://www.amazon.com/gp/product/B07C5 ... UTF8&psc=1

Hope the description visualizes it enough; we'll get it written up when we have a chance to demo it.

Thanks!

petik · Post by **petik** » Fri Jul 06, 2018 4:07 pm

brentp wrote:RaceCapture/Track MK2 with it's dual CAN bus can work with ShiftX2 using an RJ45 splitter; that way OBDII data can be accessed on CAN bus 1, and ShiftX2 can be controlled on CAN bus 2.

A splitter like this would do the job. The OBDII cable would plug into one of the ports, ShiftX2 in the other port, and the splitter's end would plug into RaceCapture/Track MK2.
https://www.amazon.com/gp/product/B07C5 ... UTF8&psc=1

Hope the description visualizes it enough; we'll get it written up when we have a chance to demo it.

Thanks!

Yep, that makes perfect sense. Thanks!