Interfase with Adaptronic

microcar · Post by **microcar** » Thu May 24, 2018 9:28 pm

Has anyone used a RaceCapture/Track with an Adaptronic Module ECU?

Post by **brentp** » Tue May 29, 2018 4:06 pm

Hi, if the ECU has a published CAN bus interface, it should be able to work with RaceCapture/Track's CAN mapping tools. Got a lead on the ECU's documentation from the manufacturer so we can review?

microcar · Post by **microcar** » Tue May 29, 2018 5:51 pm

Brent, I sent you an email with some Adaptronic files attached to see if you can help. Thanks.

Post by **brentp** » Thu May 31, 2018 4:22 pm

Hi,

Thanks - the files we received don't have any CAN protocol information. Contact the ECU mfg and they should be happy to provide this information!

Let's keep the conversation here so others can benefit from the results.

Thanks,

microcar · Post by **microcar** » Fri Jun 01, 2018 10:01 pm

I tried to attach the CAN protocol for my Adaptronic eMod016 Modular plug-in for a 1999 Miata. Hope you can figure out how to interface your RaceCapture/Track with my Adaptronic. Your system will not let me add the file as an attachment. Says it won't allow word files and when converted to PDF, says is too large. I will send it to you by email. Thanks

microcar · Post by **microcar** » Sat Jun 02, 2018 10:29 pm

Brent, I am sending the attachment by email with some additional information on Adaptronic CAN that you may be able to use.

Post by **brentp** » Tue Jun 12, 2018 3:26 pm

Moving to CAN mapping discussion.

microcar · Post by **microcar** » Sat Jun 30, 2018 7:12 pm

[quote="brentp"]Moving to CAN mapping discussion.[/quote]

Any success in interfacing using CAN to an Adaptronic ECU using all the information I provided? Would really like to be able to use Race Capture Track, that sure is a great product.

Autosport Labs