VR Sensor and missing tooth position

[damunk]

I have two questions;



1) There are two pins on the VR Sensor. Ground and signal.
I have just noticed I had mine wired the wrong way around.

2) On my old build I was a tooth out (10 degrees) but car was tuned on rolling road without a degree offset.


How did the car run?

[brentp]

Hi,

Unsure how your car was running if you had the VR sensor connected backwards!

For reference, the guide for the trigger wheel alignment is here:
https://wiki.autosportlabs.com/MJLJ_V4_ ... tion_guide