Uploaded MJLJ ignition config

Post by **brentp** » Tue Sep 07, 2004 1:41 pm

You can download my turbo MR2 ignition configuration- it's listed under the "files" section, link at top.

This is a 1.6L toyota 4AGZE motor with a T25 turbo from a 2nd gen Mitsubishi Eclipse. I'm running about 16-17 lbs of boost. You can read more about it on my Contact/about page.

The tuning is a bit rough but will give you an idea on where to start; you can also extrapolate this configuration for use in an NA Application.

Thanks,
Brent

Josh_b · Post by **Josh_b** » Tue Sep 07, 2004 6:19 pm

is it made with special invisible ink......

Post by **brentp** » Tue Sep 07, 2004 6:24 pm

whoops, I had the permissions wrong.

download away.

12joy · Post by **12joy** » Mon Nov 15, 2004 8:58 am

Hi brent, what are you using for a CR along with your setup??(This would be nice to know)

Post by **brentp** » Thu Nov 18, 2004 7:10 am

Hello,

The C/R I'm using on my 4AG is 8.0:1

Autosport Labs

Uploaded MJLJ ignition config

Uploaded MJLJ ignition config

is it me or....

whoops, I had the permissions

Hi brent

Hello, The C/R I'm using o