Is there anyone out there who has mounted the wheel and sensor onto the bottom pulley of a Rover V8? If so, any chance of some photos of your installation? I'm about to do mine and before I dive in it would be nice to see how others have done it.
Ta,
Paul
rover v8 crank sensor
Moderators: JeffC, rdoherty, stieg, brentp
Me too
Hi Paul
I have just started looking in fiting the system on the RV8 in
my MGB.
If you have some photos and coments I can stick them up on the web..
Would be a big help to me and others
Simon
www.mgv8.co.uk
I have just started looking in fiting the system on the RV8 in
my MGB.
If you have some photos and coments I can stick them up on the web..
Would be a big help to me and others
Simon
www.mgv8.co.uk
MG V8 Life is too short no to
I've not done mine yet, if I
I've not done mine yet, if I had I would already have put pictures online. I have a friend who is about at the stage of having it working though, so I'll try and get some from him.
Paul
Paul
Rover V8 Transplant
I am putting a Rover 4.0 2001 Discovery II motor into my Range Rover Classic 1992.
This motor uses a Bosch DIS system with crank sensor stock.
Since I don't have all the harnesses for the fuel injection, FI is going to have to go. But the ignition system if it will work converted with megajolt might be a good idea. Does anyone know if it is compatible with the fitted crank sensor etc on the Rover 4.0 2001 Discovery II motor.
Thanks
This motor uses a Bosch DIS system with crank sensor stock.
Since I don't have all the harnesses for the fuel injection, FI is going to have to go. But the ignition system if it will work converted with megajolt might be a good idea. Does anyone know if it is compatible with the fitted crank sensor etc on the Rover 4.0 2001 Discovery II motor.
Thanks