Parts needecd

alainmengoli · Post by **alainmengoli** » Fri Oct 22, 2004 3:38 pm

ok so If I get it right I need the following: MJLJ fully assembled box (can't e bothered building one myself), EDIS from ford car (scrappy), crank posistoin sensor and wheel to adapt to crank (ford part). Anything else I am missing?

By the way it's going onto a Fiat 124 spider twin cam 2l engine (converted to carbs).

Josh_b · Post by **Josh_b** » Fri Oct 22, 2004 6:41 pm

a trigger wheel & a way to mount it, a crank sensor & a way to mount it, an edis module, a coilpack, some shielded twin core cable a soldering iron, some single core wire oh and some spare time,

alainmengoli · Post by **alainmengoli** » Fri Oct 22, 2004 10:16 pm

thanks for that just a quick one I thought the EDIS was part of the coil?

Paratime · Post by **Paratime** » Sat Oct 23, 2004 12:22 am

No, the EDIS is a seperate part. The coils come in a pack, either 4 or 6.

alainmengoli · Post by **alainmengoli** » Sat Oct 23, 2004 8:31 am

ok i get get it then 1 edis module and 1 edis coil pack

Autosport Labs

Parts needecd

Parts needecd

you need

thanks for that just a quick

Parting, blah blah blah

ok i get get it then 1 edis m