Earthing the TPS

david jenkins · Post by **david jenkins** » Tue Jan 08, 2008 8:04 am

A very quick question - one wire from the TPS goes to earth/chassis. Is it better to take this to a chassis point near to the TPS, or would it be better to use the common earth that I use for MJ, EDIS and coil?

Or doesn't it matter either way!

David

Post by **brentp** » Tue Jan 08, 2008 8:38 am

Hi David,

Best is to use the common ground for the MJLJ. Yes, that means running 3 wires back to the unit.

david jenkins · Post by **david jenkins** » Tue Jan 08, 2008 10:40 am

Brent,

Thanks for the quick answer - that's what I expected.

david jenkins · Post by **david jenkins** » Tue Jan 08, 2008 10:51 am

One more question - it doesn't need to be screened, does it? (it's not exactly a faint and delicate signal!)

-Ad- · Post by **-Ad-** » Tue Jan 08, 2008 5:49 pm

No it doesn't, be fine with "bare" wires.
________
CHRYSLER 300 NON-LETTER SERIES HISTORY