Vauxhall XE Trigger Wheel fitment questions

retrocarclub · Post by **retrocarclub** » Mon Jan 14, 2008 3:46 pm

I'm currently attempting to fit MJ Lite to my c20xe engine but i'm having trouble working out how to mount my 36-1 trigger wheel to my front pulley. I've read the guides on this site, but they don't really help because I cant weld it or bolt it on! Somebody please help.

Cheers

Christian

-Ad- · Post by **-Ad-** » Mon Jan 14, 2008 7:39 pm

Knowing a c20xe bottom pully, it looks easy to bolt it on in my opinion.
Just use the small 6 bolts that hold the pully to the main crank pully/sprocket.
________
Michigan medical marijuana dispensaries

retrocarclub · Post by **retrocarclub** » Mon Jan 14, 2008 10:06 pm

Ok, thanks I didn't really consider using the smaller bolts for some reason. Would you shim them out to the level of the trigger wheel?

MartinM · Post by **MartinM** » Mon Jan 14, 2008 10:39 pm

http://www.autosportlabs.org/viewtopic.php?t=1565

retrocarclub · Post by **retrocarclub** » Mon Jan 14, 2008 10:47 pm

MartinM wrote:http://www.autosportlabs.org/viewtopic.php?t=1565

Thanks Martin, that's a lovely setup. Did you machine down the pulley and bolt the trigger wheel on or did you weld it? Also what size trigger wheel did you use? I'm looking at a 6.5" trigger-wheel.com one.

MartinM · Post by **MartinM** » Mon Jan 14, 2008 10:51 pm

Unfortunately I only did the MJLJ side and it's not mine - I'll try and find out....

retrocarclub · Post by **retrocarclub** » Mon Jan 14, 2008 10:57 pm

MartinM wrote:Unfortunately I only did the MJLJ side and it's not mine - I'll try and find out....

Ok thanks mate.

retrocarclub · Post by **retrocarclub** » Thu Jan 24, 2008 4:04 pm

Did you have any luck?

MartinM · Post by **MartinM** » Fri Jan 25, 2008 5:44 pm

Oops - forgot

Will try to find out this weekend....