Hard rev limiter production update

Post by **brentp** » Wed Mar 05, 2008 5:07 pm

A quick update on the hard rev limiter.

We have two more beta testers scheduled to test the hard rev limiter. Based on the previous testing I do not anticipate any problems- but they are out there for a final 'sanity check'.

For production, the following minor changes will be made:

* Board size increased slightly. However, it will still fit inside the MJLJ case for those that want an integrated installation.
* Mounting holes added to board to facilitate other installation options.
* Screw terminal posts will be eliminated. Connection to the board will be made using wire soldered with large solder pads, and the user can determine the secondary connectors
* The surface mount SOT-23 PNP transistor in the circuit may be too small for the average user to solder. Pads will be added so a common PNP through hole transistor can be used in it's place.

Production availability is about 2 weeks from now.

Thanks for your patience!

Salamander · Post by **Salamander** » Wed Mar 05, 2008 6:07 pm

I want one

The other has not reached me yet

dammit

Post by **brentp** » Wed Mar 05, 2008 7:57 pm

Don't worry! your beta test unit should arrive soon!

frans · Post by **frans** » Mon Mar 31, 2008 7:49 am

Sorry to be a pain but how about an update on the final production date?
Regards
Frans

Post by **brentp** » Mon Mar 31, 2008 1:13 pm

Hello All,

Firm is they will be available for purchase on April 10. I will follow up with pricing soon.

Thanks,

Post by **brentp** » Sun Apr 13, 2008 8:20 am

Update!

Boards and parts are now in.

Primary changes: The board size was made larger to accommodate V3 and V4 cases, and pads for a through hole transistor were added to ease kit building.

I should have these in the store by the end of the weekend.