New configuration software for V3 hardware

Yvan · Post by **Yvan** » Fri Jun 06, 2008 6:45 am

I noticed that configuration software for V4 hardware is available for download:

http://www.autosportlabs.net/MJLJ_V4_Downloads

Is there a version for V3 hardware?

I finally found the use for the user configurable outputs.

I fitted a/c to my car, and when it's on and I am stuck in traffic engine temperature rises above normal. Originally car had only one fan powered by the engine, and now I added another two speed electrical one.

When I turn a/c on fan is automatically started on low speed.

What I want is that mjlj starts it on high at the preset temperature. Now I have to do that by hand keeping an eye on the temp gauge.

So is there new configuration software for V3 hardware

Post by **brentp** » Fri Jun 06, 2008 3:15 pm

Hi Yvan,

There will be a firmware upgrade for V3 hardware that brings in almost all of the features in V4. When that firmware is complete there will be a new version of the configuration software to compliment the firmware.

This is also touched-upon in the V4 testing thread in "Future Upgrades"- there you will see what features the new V3 firmware will have.

Yvan · Post by **Yvan** » Fri Jun 06, 2008 7:46 pm

OK, thank you. When can I expect that I can download it?

Post by **brentp** » Fri Jun 06, 2008 11:57 pm

In the next few weeks, likely, while the 4.x firmware and config software is still fresh in my mind.

Yvan · Post by **Yvan** » Wed Jul 09, 2008 6:06 pm

I was away for a month, any news on this? Will firmware upgrade for V3 hardware be available soon?

Post by **brentp** » Wed Jul 09, 2008 6:19 pm

Still working on it, but yes, soon. I'm striving to have a consolidated config software for both V4 hardware/firmware and corresponding updated firmware for V2/V3 hardware.

Yvan · Post by **Yvan** » Wed Jul 09, 2008 6:45 pm

OK, thank you.