x-flow 1300 Map
Moderators: JeffC, rdoherty, stieg, brentp
x-flow 1300 Map
Here is my Map that I used on my 1300 xflow in a locost
- Attachments
-
- 3d map-locost1300.mjlj
- My Map for a 1300 xflow with a GT cam, webber 40's. Everything else is standard.
Uses regular fuel - (719 Bytes) Downloaded 868 times
-
- Here is the performance Graph of a run down a 1/4 mile strip
- x-flow 1300.jpg (128.51 KiB) Viewed 9203 times
i've been asked to set one of these up for a customer (i usually do megasquirt so i'm ok with this stuff)
so i borrowed ya map with a few changes all seams ok but were down on power compared to a when it was running a dissy only by 10 bhp or so. just wondered if u knew of any other things we can do ....?
or is this the case with mega jolt ..... lose a bit on the top end but get better driveability
so i borrowed ya map with a few changes all seams ok but were down on power compared to a when it was running a dissy only by 10 bhp or so. just wondered if u knew of any other things we can do ....?
or is this the case with mega jolt ..... lose a bit on the top end but get better driveability
-
wonderfulweasel
- Posts: 7
- Joined: Mon Aug 13, 2007 5:23 pm
- Location: Birmingham