Throttle pot wiring...

[virgil]

Folks have got Weber throttle pot switch and have just had confirmed by Weber the following
Pin 1, Purple/Blue wire, signal
Pin 2, Blue, Ground
Pin 3, Green/Red, 5V ref
My question is which of the three wires (orange, black and white)from the MJ unit do I connect each to?
Would I be correct with the following...
Pin 1 on TPS to orange (pin 9 on MJ)
Pin 2 on TPS to Black (pin 8 on MJ)
Pin 3 on TPS to White (Pin 6 on MJ)