Page 1 of 1
Label Idea
Posted: Fri Jun 22, 2007 11:56 am
by capri_turbo
As I've been upgrading my V3 unit for map switching today, I thought about creating a label for the unit.
I also thought it might be a good idea to allow info to be written on the label, so I created one in Photoshop, printed it and laminated it to allow it to be written on, cleaned and rewritten. Any thoughts?
Posted: Fri Jun 22, 2007 3:22 pm
by brentp
An interesting idea- thank you.
If someone needs a memory jog like this then perhaps a sticker on the side, not unlike the serial #, product code stickers you'd see on commercial hardware. I've never seen that combined with the main product logo.
As for the usefulness, that would vary I suppose. Most people only have 1 (or two) of these ignition controllers, so it should be pretty easy to remember what firmware version they're running. The windows software also tells you what version it is (Help/About).
The part on the what maps are configured seems more useful, but I always envisioned that label being next to the switch on the dash or console that controls it.
Thanks!
Posted: Fri Jun 22, 2007 11:22 pm
by DannyP
Is the new logo available on here? I printed an old-style logo, and the new one is just so, ah, new!
A friend of mine has a sign business so no prob to print out the file on vinyl. Thanks.
Posted: Sat Jun 23, 2007 8:12 am
by capri_turbo
my memory is terrible, so i need to write things down, and what better place. It's similar to what we do at work.
As for the logo, I simply saved the image from the main page here and added bits in Photoshop.
Not sure that it is suitable for everyone, but it works for me.
Posted: Sat Jun 23, 2007 10:55 am
by DannyP
Thanks, I thought of that after I posted. Sometimes I am a little slw on the uptake..
Posted: Fri Sep 07, 2007 8:33 pm
by Ken555
capri_turbo wrote:As for the logo, I simply saved the image from the main page here and added bits in Photoshop.
Is the file available somewhere ?
Made one
Posted: Thu Sep 27, 2007 10:33 pm
by Ken555
For those that are looking for a label, I made this one based on the design above
Posted: Fri Oct 12, 2007 10:30 am
by Hiperformance71
Hello to all,
I'm with Brent idea, for a professional looking, the label is best to separate from the logo. I have tried a little graphical test, here my version of the label. What do you tink about?? Let me know!!
This label if for side mount.
Cheers
