I hope this is not a noob question Im about to ask but here goes.....
I have a 36 tooth crank wheel VR sensor and twin coild packs and I was wondering if there is a way to get these running on my 4ag engine (running twin 45 webers).
Just to make this clear the coil packs have ignitors built in. is there a way to run the coils and the megajolt without the EDIS module and plug it into the coils as the ignitors are built in??
Q: setup for twin coils
Moderators: JeffC, rdoherty, stieg, brentp
The current version of Megjolt does require the use of the EDIS module and conventional coil packs - not ones with built-in igniters.
A future version of Megajolt with the moniker "Coil On Plug" will be designed to work with coil packs having built-in igniters, like the ones from the GM LS-1 motor, Toyota's coil-on-plug modules, and etc.
A future version of Megajolt with the moniker "Coil On Plug" will be designed to work with coil packs having built-in igniters, like the ones from the GM LS-1 motor, Toyota's coil-on-plug modules, and etc.