Screens for PIP and SAW signals

EDIS and Megajolt installation related topics. Be sure to review the <a href="http://www.autosportlabs.net/MJLJ_V4_vehicle_installation_guide">Vehicle installation guide</a>

Moderators: JeffC, rdoherty, stieg, brentp

Post Reply
thesurfbus
Posts: 0
Joined: Thu Jan 20, 2005 7:53 am

Screens for PIP and SAW signals

Post by thesurfbus »

I have just created my wiring loom for the MJLJ end of the installation, and at the back of my mind I thought that the PIP and SAW signals might need to be screened, but I haven't done this. I went to wire up the EDIS end and noticed that Ford used a screened cable for the PIP and SAW signals. Can anyone confirm if I will need this screen, or will it run OK without?

Thanks

Doug

dermot
Posts: 0
Joined: Wed Sep 22, 2004 11:28 am

yes

Post by dermot »

I would advise u to screen them. Sometimes they can work without but I would not do it, it's not hard.

-D

Post Reply