Hi all
I've been look into mjl system and I'm sure it will improve performance/drivabley on my car.
I have got a peugeot 205 Gti on twin 45's carbs with a Piper 300 degree cam shaft, would it be ok to use the MAP sensor with this setup?
any help would be greatfully recived
John (UK)
can I use a MAP sensor??
Moderators: JeffC, rdoherty, stieg, brentp
-
- Posts: 2
- Joined: Mon May 24, 2004 5:08 pm
You could use the sensor but
You could use the sensor but you will need to hook a vacume gauge up and see what you are running at idle and cruise. You may be better off with just a "mechanical advance" setting. You would still see improvement over stock.
Todd
Todd