Autosport Labs

Basically I had my 2.0 zetec set up on the rolling road using a megajolt with a map sensor I now have another megajolt but it's a tp set up can I still use my map that I have saved or is it different? If so can it be converted or am I best to get it set up again on the rollers.
Cheers Neil

You can convert it manually you nee to find your highest and lowest vac readings then convert them to the 0% to 100% of the tps signal

For example

Minimal vaccum 200
Max vaccum 600

So 50% tps value would be 400 vaccum