Autosport Labs

I finally used my RCP in anger this weekend, but when importing the three logs, I got this error:

"Failed to prepare Insert DatalogRow statement"

What am I doing wrong? I'm running the latest firmware (1.1.13) and the latest RaceAnalyzer (1.1.12).

As an aside, it's great to finally see brake pedal usage (just on/off for now), oil pressure (but I need to adjust the resistor for better resolution) and wheel speed (which only seems to show a small number of RPMs and varies wildly irrespective of speed). I'm sure the accelerometer readings will become more accurate when I more solidly mount the box, although a 10 point moving average looks pretty good.

Anyone else getting this or have any ideas? I've tried the logs on different workstations and the same thing each time. Logs appear to be complete and I can analyse them in Excel, but that's time consuming...

53 views and nobody had this problem? Anyone any ideas at all? Can anyone else import my logs?

andylaurence wrote:53 views and nobody had this problem? Anyone any ideas at all? Can anyone else import my logs?

I'd give it a try if I could figure out how to download the file from www.bigupload.com without having to register/signup.

I got a failure with a more detailed error message, attached.

Try manually editing the log file to remove the '.' character in the oil pressure channel name. I think that's screwing up the program.

Good spot! So punctuation is not a good idea with channel names then. I've now been able to import all my logs by amending the channel name. Is there a way that this could be either limited when inputting the name of the channel or caught by some better error catching on the import script?