I just posted my design for a 3D printed Race Capture Pro mount.
It's designed for 1.75 diameter roll cage tubing and uses a standard metal hose clamp to mount to the cage. Once printed, holes need to be drilled on the platform.
Prints well with ABS or PLA. Carbon fiber PLA from ProtoPasta is my favorite filament for this.
http://www.thingiverse.com/thing:1130770
3D printed Race Capture Pro mount.
Moderators: JeffC, rdoherty, stieg, brentp
-
loftygoals
- Posts: 26
- Joined: Fri Oct 31, 2014 4:21 am
- Location: Dallas, TX