Page 1 of 1
4 AnalogX on the same CAN bus
Posted: Thu Oct 05, 2017 5:38 pm
by Vrushabh
Jumpers on AnalogX lets you configure 4 AnalogX devices to run on the same CAN bus, agreed but I am confused which jumper you are talking about because the documentation for AnalogX does not specify some thing specific for 4 AnalogX together. Also how will we obtain CAN ID for each AnalogX input.
Posted: Fri Oct 13, 2017 3:22 pm
by brentp
Hi,
It is documented here:
https://wiki.autosportlabs.com/AnalogX#CAN_base_ID
The jumpers are on the bottom of the AnalogX board, and are labeled accordingly.
Hope this helps!
Posted: Fri Nov 24, 2017 10:28 am
by Vrushabh
Is it possible to use 3 AnalogX on same CAN bus or it should be a pair of 4 ? Does it affect us in any case because 3 AnalogX will serve the purpose for me.
Thank you.
Posted: Sat Nov 25, 2017 7:19 pm
by brentp
You can use 1,2,3 or 4 AnalogX on the same CAN bus, by changing the jumper settings, documented in the WiKi.
Thanks,