Im have trouble, which seams to be the norm. Im having no luck with MJLJ talking to the v3 board.
I get the msg 'unable to open coms port 1' etc.
Ive tried the hyper terminal and the bray terminal.
The bray terminal works as far as i can see (im not to good with computers)
The hyper-terminal im not sure, i get symbols on the screen.
Ive tried the normal re-installing the java software, moved the Comms.jar to the mjlj folder. etc.
Help somebody. Working in the electronics field, I thought this project would be easy, well building the board was.
Spence
Comms Port 1
Moderators: JeffC, rdoherty, stieg, brentp
On the right of this page
On the right of this page there is a 10 Most Recent Files section. Download and install either of the first two files called 0.2.2.1260_preview (installer) & (archive). Install, run the program, choose COMM port, and click connect.
Thank, it comunicate with
Thank, it comunicate with the board ok. Just need to upload a Zetec Map and ill be firing on all fours.
Thanks Spence.
Thanks Spence.