Autosport Labs

yes, its a lasercut wheel mounted on the outside, on the rubber mounted bit.

i dont think 2 degs as going to make much odds when is pulling 35 plus degrees at part throttle without much load.

you dont notice it when on the power hard / accelerating...

dunno...

Oh, just thought....

although the cables are scfreened, the VR sensor wire is run in a loom that say the first 3rd is taped to the coil wires. could this cause a problem?

maybe i should seperate them?

Hi Brent, gap is about 0.8mm on the sensor., i posted a few weeks back about the plugs, running BPR6ES, they are new too.... leads are in good cond, only a year or so old. have another older set i can try, but its been doing this ages, i thought it was fuelling, but now ive tried new carb setup im s...

hey guys, got an odd one on our mini, could do with some thoughts on if i hold the revs at about 4k, it starts to sort of hunt. and flicks up n down about 400rpm. this is quite noticeable whilst driving, as it feels a bit jumpy. but seems only noticable on part throttle. now ive remounted the crank ...

Hi guys, im sure this has been covered before, but just wanted to check. (did a quick search didn find what i was after.) Do i need resistive plugs for MJLJ?? im running them in a mini, i think ive used BPR6ES before.... anyone care to confirm? OR Champion / bosch numbers. (had to swap mine out befo...

Actually, is that you Chris? your on minilist still arent you? (probably got it all wrong LOL)

Yep, and his missus wasnt keen him keeping putting V8 bits in the dishwasher LOL I particularly like the gearbox machining.... which seemed to entail trying a rope around a gearbox and dragging it up and down the garden path!! LOL Havent seen Ian for a while now... last thing i heard was he was Modd...

I love minis....... i dont need to say anymore!

Andy C wrote:definately interested, no promise, but i'll do my best to turn up. a three year old running round the ankles always hinders any attempt at putting the wheels back together, but i did want to show my support.

Ha ha... i know that feeling!!! LOL

Ive not been on here for a while... but up for a meet up... im in Coventry too, so midlands no probs....

Am down in Newquay with mini on Riv-Run bank holiday weekend tho...

Ross.

WOW... Hi Brent / Guys... Not been on here for AGES!! (had a spine operation.... :( better now tho) Just wondered if you had seen the thunder races with the guys who put a V8 in a Nissan Micra!!! hes a freind of mini... put a V8 in a mini too LOL www.v8mini.co.uk Anyway, our minis still going strong...

Had a checke, and my values stay after a cycle too.

Ross.

ill have to verify that, but it certainly updates it, as i watched the timing flicking back and forth as i changed the figure.

didnt re-check after a power cycle....

will do though.

Ross.

Hi Brent, ive not been about for a bit, been doinf some major bodywork on another car, and i only just got round to updating my V3's to the latest firmware. As ive had the engine apart, i thought id make use for the trigger offset feature, save me adjusting the crank pulley / trigger wheel. now when...

Pii 600mhz, 300mb ram compaq laptop.... runs like a dream.... (slow PC by todays standards.... originally had win98 but now runs XP)

Ross.