Autosport Labs

Hi, i have a map for a 306gti6 engine, standard apart from a pair of 45s.

I would like to be able to share this if needed. just like to know how to 'get' the map?

Also, my Megajolt ECU has a serial port, can i upgrade this to a USB safely without damaging my ECU/map?

Many thanks

Matt

Right, thanks for the replies, i have ran the tests, all components seam fine, but upon cranking i saw a blue flash, dug the wires out and found a power and tacho wire shorting on the underside of the battery tray! Wooo hooo!, gotta be it! Spent this evening digging out all wires, double checking an...

Thanks Brent, i presume the tests for the coil are between coil live (feed) and battery/body ground for primaries. Do you measure the secondaries between the coil H/T output and battery ground?

Thanks for the info.

Matt

Morning! I had a look through but couldnt find the answer. Is there a way of testing the EDIS 4 unit with a multimeter, oh and also the coilpack please?
Many thanks!
Matt

Hi, i have a 205 gti running a 306 GTi6 engine on MJLJ and Webers. When i got the car running a few years back i fitted two diodes (IN4004) and one resistor 1K +/-5% ( i think, bands are brown, black, red gold, im very novice!!) To rectify the dash tacho reading as it was reading half it should. Im ...

FTDI Chipset, is the thing i ment, not FTDP, heres a link to one another member used, and think it worked. http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... 0485485528
Hope this helps
Matt

I have tried 2 of the Maplins, and two other makes, all had a prolific chipset, and none worked. I have been told a differant chipset (FTDP or something?!) may work, but dont ask me what this all means, if its not nuts and bolts, i find it quite hard to fathom!! In the end i got so p*ssed off with a...

Thanks for the replies everyone, its all sorted now. I only remembered how the limiter works (sets to 0 deg) on my way home! its all sorted now, and im a happy chappie!!
Many thanks for the quick replies.
Matt

Ok thanks, am i going the right way about setting the limiter?
Thanks
Matt

Hi, i have finaly sorted the conection to my MJLJ, by ditching the USB convertor and getting the PC into the garage which has a serial port! Just wondering how to set rev limiter (soft cut). I have got my map etc up on screen, and have the options to set the 4 outputs, shift light and rev counter et...

Thanks Nitropixie, i presumed this was the case,
Still having trouble finding a decent USB-serial adapter, and also hardwork to find a laptop with serial, am seriously concidering putting the home PC in the garage.
matt

Hi, just a quick one, i guess that when the MJLJ is correctly connected to the configurator (laptop) that my map should apear on the screen? Or do i have to click on the 'GET CONFIGURATION' button?
Many thanks.
Matt

This is finaly some good news on the adapter topic!
Will look into this one as i am having problems (like LOTS of people here) with the adapter.
Chears
Matt

I see, prolific is a type of chipset, thats how much i know about computors!
as i said, i have one coming mid week from amazon, i will report back with model and weather it works or not.
Chears
Matt

Take a look on Amazon, LOADS cheaper than where i bought my first converter (which i suspect doesnt work!)
They many about £3.80 delivered, Maplins want £20!!