Autosport Labs

Here is a photo of how I bolted on the trigger wheel for my '74 MG 1275. I just got laid-off from work where we had a full machine shop which I was going to use to do this job, but low and behold I had to do it at home. I have an inexspensive cad program and calipers. I entered all my diameters and ...

Thank you, Brent. I worked at a specialty stainless manufacturer for about 3 years and learned how easy it can be to work with stainless steel. What costs most for anything stainless is the finish time involved. I have about 4 hours into my plenum with 3 of those hours in finish work. The plenum sec...

What is it? I built this even before I assembled my MJLJ V4 with Map. Afetr reading all the informative info in the forums about vacuum plenums/reservoirs I designed and built this 60cc Stainless Steel unit. I used a 60cc syringe full of water to get it as close to correct as possible. I estimate I ...

It's always a great day when you can learn something. It IS a narrowband unit. Thank you for all your help. Bret

Okay gonna open my mouth and see how ignorant I am...I am not sure what wideband is but I sure do understand affordable! I came across an unused K&N fuel ratio mixture meter on e-bay for real low investment and bought it. I researched it pricewise and found it was very affordable from K&N. I...

Found it accidently while trying to figure out how to apply vacuum to my 123 ignition distributor for my '74 Midget. Running a DCOE 45 and was told that I will have no vacuum to read. Found Autosportlabs web site and been reading the forums for 4 days straight. Ordered my MJLJ 2 days ago and was not...